Freewing Avanti 80mm EDF sport jet V2
Specifications FEATURES BUY NOW


● Standard    ○ Optional   - Not Included  


 EPO foam & ABS Plastic
 Wingspan  1236mm / 48.6"
 Length  1300mm / 51.2"
 Take off weight  2185g / 77oz (w/o battery)
 Top Speed  190KPH / 120MPH
 EDF / Propeller  80mm 12-Blade ducted fan (V2,2023)
 Motor  3658-2150KV Inrunner Brushless Motor
 ESC  100A / 7A BEC with EC5 Connector  (Thrust reversing ESC)

 Digital metal gear servo 9g ╳ 8pcs

 Landing Gear

 Electronic retractable landing gear with metal shock absorbing struts

 Cabin door  Front door, Main Landing gear door
 LED lights  Formation lights  ╳ 4pcs 
 Spcial accessories  Multi-Function Control board
 Ailerons   ●
 Elevator   ●
 Rudder   ●
 Flap   ●
 Canards   -
 3DTV Nozzle Set   -
 After-burner   ○


● Standard    ○ Optional   - Not Included  
Models   EDF Fan Motors   ESC Servos Landing gear Cabin door Led lights


Control board

ARF Plus - - - -


Specification parameter introduction
Skill Level 
Specification parameter introduction
Required Radio 
6+ Channe
Specification parameter introduction
Required Battery
6S 22.2V 4000~6000mAh LiPo
EC5 Connector
Specification parameter introduction
Assembly Way
Fixed by screw
Specification parameter introduction
Build Time
About 1 hours


Avanit S V2 New color scheme

The new red and grey color scheme, looks very eye-catching in the air,

and the medium gray color is not easily affected by sunlight to cause blistering problems.


Cabin door

The redesigned nose cabin door enhances practicality and aesthetics.

Also, the extend and enlarge the outer frame of the cabin door can protect the raised foam at the bottom.


Cabin door Control

Avanti V2 used  the double-sided spring compression type control structure of the cabin door.

It results in higher structural reliability.


Nose landing gear

Compared to the old version, the Avanti V2  has reduced the total height of the front landing gear.

The landing gear piston rod is thickened, and the torque arm fixing parts and the main support rod are processed and formed as one, eliminated the assembly structure.

Add linear bearings to improve shock absorption effect.


Main landing gear

The thickness of the main landing gear shock absorber arm has been increased

from 3mm to 4mm, improved the strength of the landing gear.


Power system

Upgraded to the new 12 blade EDF with new in-runner motor and the 100A ESC with thrust reverse function.

The thrust is stronger, and the level flight speed has been increased from 165KPH to 180KPH.

A plastic cover has been added to the protruding part of the power compartment cover for protection.


Elevator plastic hinge

Added a new plastic hinge in the elevator of Avanti V2, it prevent the elevator surface from tearing from here.


Center of gravity

There is a CG marking line of the lower main wing for easy confirmation of the center of gravity.


LED navigation lights

Avanti V2 has four pcs LED navigation lights, its flashing frequency is controlled by the control board.


Main wing structure

Use the ribbon wires and screws to connect the main wing and fuselage,

making it very easy to store and transport.


Battery compartment

Avanti V2 have a big battery compartment, it can use the 6S 4500~6000mAh lipo battery to fly.



understand more

For product purchase, use, repair and maintenance issues, you can contact us here

Service Hotline

+: 86 769 82 669 669

service hours

Mon.~ Fri.(UTC+8)8:30-17:30

Spec Features Spare parts More